1. Use rubber sealing ring: The wire inlet of the Explosion-Proof Camera must be sealed with a rubber sealing ring, which is a key measure to ensure explosion-proof performance.
2. It is forbidden to fill other substances: It is forbidden to use other methods such as filling sealing glue, asbestos rope to replace the rubber sealing ring, and it is also forbidden to fill any substance in the cavity to avoid losing the explosion-proof performance.
3. Keep the sealing ring clean: The oil stains on the rubber sealing ring should be scrubbed clean to avoid aging and deterioration.
4. Tighten the clamping nut: The clamping nut at the wire inlet must be tightened to ensure sealing.
5. Treatment of redundant wire inlets: The elastic sealing pads and metal gaskets of the redundant wire inlets and outlets must be kept in the sealed state at the factory, and the clamping nut should be tightened to seal the wire inlet.
6. It is forbidden to merge multiple strands of wires: It is forbidden to merge multiple single strands of wires and enter the wire inlet through a single-hole elastic sealing ring.
1. Elastic sealing ring sealing: This is the most commonly used method. By installing an elastic sealing ring at the inlet, the sealing between the cable and the inlet is ensured.
2. Metal or composite sealing ring sealing: In some cases, sealing rings made of metal or composite materials can also be used to achieve sealing.
3. Packing sealing: In some special cases, packing can be used to achieve sealing, but this method is relatively rarely used.
1. Inspection during installation: Before installing the sealing ring, the sealing ring should be carefully checked for signs of damage or aging. If there is any problem, it should be replaced in time.
2. Regular maintenance: During daily operation and maintenance inspections, the sealing condition of the inlet should be checked regularly to ensure that the sealing ring is not loose or damaged.
3. Professional operation: The sealing operation should be performed by professionals who have been trained in explosion-proof technology to ensure the reliability and explosion-proof performance of the seal.






